Perle Systems Switch DS1 Manuale Utente Scaricare il pdf (Pagina 149)

149

Channels

Output Specify how the channel output will be handled.

Data Options:

z Manual—You must manually manipulate the channel output.

z Pulse—Activates and deactivates the channel output activity in intervals

after it is manually activated.

z Inactive-to-Active Delay—The channel output will remain inactive for

the specified time interval after it is manually started.

z Active-to-Inactive Delay—The channel output will go inactive after the

specified time interval after it is manually started.

Default: Manual

Pulse Mode When Output is set to Pulse, you can specify the manner of the pulse.

Data Options:

z Continuous—Continuously pulses active and inactive.

z Count—Pulses an active/inactive sequence for the specified number of

times.

Default: Continuous

Pulse Count The channel output will pulse for the specified number of times; each count

consists of an active/inactive sequence.

Default: 1

Inactive Signal

Width

How long the channel will remain inactive during pulse mode.

Range: 1-9999 x 100 ms

Default: 1 (100 ms)

Active Signal

Width

How long the channel will be active during the pulse mode.

Range: 1-9999 x 100 ms

Default: 1 (100 ms)

Delay When a deactivate command is issued, a delay is implemented before the

command is executed.

Range: 1-9999 x 100 ms

Default: 1 (100 ms)

Failsafe Action When there has been no I/O activity within the specified time (set in the I/O

Interfaces, Settings on the Failsafe Timer tab) and the

Failsafe Timer is

triggered.

Data Options:

z None—The state of the Digital/Relay output remains the same, no change.

z Activate Output—Activates the channel.

z Deactivate Output—Deactivates the channel.

Default: None

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 245 246

Commenti su questo manuale

Nessun commento

Perle Systems Switch DS1 Manuale Utente Pagina 149

Commenti su questo manuale

Prodotti e manuali riguardandi Networking Perle Systems Switch DS1